Crosby G209 Alloy Bow Shackles

  • Crosby G209 Alloy Bow Shackles
    Crosby
  • Brand: Crosby
  • Availability: In Stock
  • Estimated lead time to dispatch is Same Day Before 1pm
  • £3.97


Available Options



Hire Quote

This product is available for hire

Get a quote today:

Add to Hire Quote

Crosby Alloy Bow Shackles

  • Capacities 1/3 thru 55 metric tons, grade 6. Forged - Quenched and Tempered, with alloy pins.
  • Working Load Limit and grade “6” permanently shown on every shackle.
  • Hot Dip galvanised or self coloured.
  • Fatigue rated.
  • Shackles 25t and larger are RFID EQUIPPED.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order, charges will apply.
  • Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F). All 209 and 210 shackles can meet charpy requirements of 42 joules(31 ft-lbs) avg. at -20 degrees C (-4 degrees F) upon special request.
  • Meets or exceeds all requirements of ASME B30.26.
  • Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.
  • Look for the Red Pin. . . the mark of genuine Crosby quality.
Nominal Size (in.) Working Load Limit (t)* Weight Each (kg) Tolerance C Tolerance A
3/16 1/3 0.03 1.50 1.50
1/4 1/2 0.05 1.50 1.50
5/16 3/4 0.09 3.30 1.50
3/8 1 0.14 3.30 1.50
7/16 1-1/2 0.17 3.30 1.50
1/2 2 0.33 3.30 1.50
5/8 3-1/4 0.62 6.35 1.50
3/4 4-3/4 1.07 6.35 1.50
7/8 6-1/2 1.64 6.35 1.50
1 8-1/2 2.28 6.35 1.50
1-1/8 9-1/2 3.36 6.35 1.50
1-1/4 12 4.31 6.35 1.50
1-3/8 13-1/2 6.14 6.35 3.30
1-1/2 17 7.80 6.35 3.30
1-3/4 25 12.6 6.35 3.30
2 35 20.4 6.35 3.30
2-1/2 55 38.9 6.35 6.35

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 94.

Technical specification Technical specification

Nominal Size in  Working Load Limit   Weight Each KG Tolerance C Tolerance A
3/16 1/3‡ 0.03 1.50 1.50
1/4 1/2 0.05 1.50 1.50
5/16 3/4 0.10 3.30 1.50
3/8 1 0.15 3.30 1.50
7/16 1-1/2 0.22 3.30 1.50
1/2 2 0.34 3.30 1.50
5/8 3-1/4 0.62 6.35 1.50
3/4 4-3/4 1.23 6.35 1.50
7/8 6-1/2 1.79 6.35 1.50
1 8-1/2 2.28 6.35 1.50
1-1/8 9-1/2 3.75 6.35 1.50
1-1/4 12 5.31 6.35 1.50
1-3/8 13-1/2 7.18 6.35 3.30
1-1/2 17 8.62 6.35 3.30
1-3/4 25 15.4 6.35 3.30
2 35 23.7 6.35 3.30
2-1/2 55 44.6 6.35 6.35
3 † 85 70 6.35 6.35
3-1/2 † 120 ‡ 120 6.35 6.35
4 † 150 ‡ 153 6.35 6.35

Nominal Size (in.) Dimensions (mm)
A B C D E F G H L M P
3/16 9.65 6.35 22.4 4.85 15.2 14.2 24.9 37.3 4.06 28.4 4.85
1/4 11.9 7.85 28.7 6.35 19.8 15.5 32.5 46.7 4.85 35.1 6.35
5/16 13.5 9.65 31.0 7.85 21.3 19.1 37.3 53.0 5.60 42.2 7.85
3/8 16.8 11.2 36.6 9.65 26.2 23.1 45.2 63.0 6.35 51.5 9.65
7/16 19.1 12.7 42.9 11.2 29.5 26.9 51.5 74.0 7.85 60.5 11.2
1/2 20.6 16.0 47.8 12.7 33.3 30.2 58.5 83.5 9.65 68.5 12.7
5/8 26.9 19.1 60.5 16.0 42.9 38.1 74.5 106 11.2 85.0 17.5
3/4 31.8 22.4 71.5 19.1 51.0 46.0 89.0 126 12.7 101 20.6
7/8 36.6 25.4 84.0 22.4 58.0 53.0 102 148 12.7 114 24.6
1 42.9 28.7 95.5 25.4 68.5 60.5 119 167 14.2 129 26.9
1-1/8 46.0 31.8 108 29.5 74.0 68.5 131 190 16.0 142 31.8
1-1/4 51.5 35.1 119 32.8 82.5 76.0 146 210 17.5 156 35.1
1-3/8 57.0 38.1 133 36.1 92.0 84.0 162 233 19.1 174 38.1
1-1/2 60.5 41.4 146 39.1 98.5 92.0 175 254 20.6 187 41.1
1-3/4 73.0 51.0 178 46.7 127 106 225 313 25.4 231 57.0
2 82.5 57.0 197 53.0 146 122 253 348 31.0 263 61.0
2-1/2 105 70.0 267 69.0 184 145 327 453 35.1 330 79.5


* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 94.