Crosby G-2130 Bolt Type Anchor Shackles

  • Crosby G-2130 Bolt Type Anchor Shackles
    Crosby
  • Brand: Crosby
  • Availability: In Stock
  • Estimated lead time to dispatch is Same Day Before 1pm
  • £8.23


Available Options



Hire Quote

This product is available for hire

Get a quote today:

Add to Hire Quote

Crosby G-2130 Bolt Type Anchor Shackles

  • Capacities 1/2 thru 85 metric tons, grade 6.
  • Working Load Limit and grade 6 permanently shown on every shackle.
  • Forged - Quenched and Tempered, with alloy pins. Hot Dip galvanised or self coloured. (85, 120, and 150-metric ton shackles are all hot dip galvanised bows and the bolts are Dimetcoted® and painted red)
  • Fatigue rated (1/2t - 55t) Shackles 25t and larger are RFID EQUIPPED.
  • Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F).
  • Meets or exceeds all requirements of ASME B30.26. Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.
  • Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
  • Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.
  • All 2150 shackles can meet charpy requirements of 42 joules (31 ft-lbs) avg at -20 degree C (-4 degrees F) upon special request.
  • Look for the Red Pin® . . . the mark of genuine Crosby quality.

Nominal Size in  Working Load Limit   Weight Each KG Tolerance C Tolerance A
3/16 1/3‡ 0.03 1.50 1.50
1/4 1/2 0.05 1.50 1.50
5/16 3/4 0.10 3.30 1.50
3/8 1 0.15 3.30 1.50
7/16 1-1/2 0.22 3.30 1.50
1/2 2 0.34 3.30 1.50
5/8 3-1/4 0.62 6.35 1.50
3/4 4-3/4 1.23 6.35 1.50
7/8 6-1/2 1.79 6.35 1.50
1 8-1/2 2.28 6.35 1.50
1-1/8 9-1/2 3.75 6.35 1.50
1-1/4 12 5.31 6.35 1.50
1-3/8 13-1/2 7.18 6.35 3.30
1-1/2 17 8.62 6.35 3.30
1-3/4 25 15.4 6.35 3.30
2 35 23.7 6.35 3.30
2-1/2 55 44.6 6.35 6.35
3 † 85 70 6.35 6.35
3-1/2 † 120 ‡ 120 6.35 6.35
4 † 150 ‡ 153 6.35 6.35

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 94. † Individually Proof Tested with certi cation. ‡ Furnished in Anchor style only and furnished with Round Head Bolts with welded handles. 

Technical specification Technical specification



Nominal

Size (in.)

Working Load Limit

(t)*

Stock. No.Weight Each (kg)Dimensions (mm) 
Tolerance + / -
G-2130S-2130G-2130OCABCDEFHLMNCA
3/161/3 ‡10194640.039.656.3522.44.8515.214.237.324.932.84.851.501.50
435564349710194660.0511.97.8528.76.3519.815.546.732.539.66.351.501.50
5/16435581019468.1013.59.6531.07.8521.319.15337.346.27.851.501.50
4368011019470.1516.811.236.69.6526.223.16345.255.19.653.31.50
7/161-1/210194710.2219.112.742.911.229.526.974.051.563.811.23.31.50
434972101947210194810.3620.616.047.812.733.330.283.558.571.112.73.31.50
436823-1/41019490101950612620130.6226.919.160.516.042.938.110674.590.417.53.31.50
435584-3/41019515101952412620221.2331.822.471.519.151.0461268910520.66.351.50
436846-1/21019533101954212620311.7936.625.48422.4585314810212224.66.351.50
18-1/21019551101956012620402.2842.928.795.525.468.560.516711913726.96.351.50
1-1/89-1/21019579101958812620593.754631.810828.774.068.519013115031.86.351.50
1-1/4121019597101960412620685.3151.535.111931.882.576.021014617035.16.351.50
1-3/813-1/21019613101962212620777.1857.038.113335.1928423316218338.16.353.3
1-1/2171019631101964012620868.6260.541.414638.198.59225417519641.16.353.3
1-3/42510196591019668126209515.47351.017844.512710631322524657.06.353.3
2351019677101968623.782.557.019751.014612234825327561.06.353.3
2-1/2551019695101970244.61057026766.518414545332734579.56.356.35
3† 8510197117012782.533076.0200165546365384926.356.35
3-1/2† 120 ‡101973912013395.5372922292036264194321056.356.35
4† 150 ‡10197571531401083681042542296534684511166.356.35
Nominal Size in  Working Load Limit   Weight Each KG Tolerance C Tolerance A
3/16 1/3‡ 0.03 1.50 1.50
1/4 1/2 0.05 1.50 1.50
5/16 3/4 0.10 3.30 1.50
3/8 1 0.15 3.30 1.50
7/16 1-1/2 0.22 3.30 1.50
1/2 2 0.34 3.30 1.50
5/8 3-1/4 0.62 6.35 1.50
3/4 4-3/4 1.23 6.35 1.50
7/8 6-1/2 1.79 6.35 1.50
1 8-1/2 2.28 6.35 1.50
1-1/8 9-1/2 3.75 6.35 1.50
1-1/4 12 5.31 6.35 1.50
1-3/8 13-1/2 7.18 6.35 3.30
1-1/2 17 8.62 6.35 3.30
1-3/4 25 15.4 6.35 3.30
2 35 23.7 6.35 3.30
2-1/2 55 44.6 6.35 6.35
3 † 85 70 6.35 6.35
3-1/2 † 120 ‡ 120 6.35 6.35
4 † 150 ‡ 153 6.35 6.35