Crosby G210 Screw Pin Chain Shackles

  • Crosby G210 Screw Pin Chain Shackles
    Crosby
  • Brand: Crosby
  • Availability: In Stock
  • Estimated lead time to dispatch is Same Day Before 1pm
  • £4.77


Available Options



Hire Quote

This product is available for hire

Get a quote today:

Add to Hire Quote

Crosby Screw Pin Chain Shackles

  • Capacities 1/3 thru 55 metric tons, grade 6. Forged - Quenched and Tempered, with alloy pins.
  • Working Load Limit and grade “6” permanently shown on every shackle.
  • Hot Dip galvanised or self coloured.
  • Fatigue rated.
  • Shackles 25t and larger are RFID EQUIPPED.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order, charges will apply.
  • Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F). All 209 and 210 shackles can meet charpy requirements of 42 joules(31 ft-lbs) avg. at -20 degrees C (-4 degrees F) upon special request.
  • Meets or exceeds all requirements of ASME B30.26.
  • Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.
  • Look for the Red Pin. . . the mark of genuine Crosby quality.


Nominal Size (inch) Working Load Limit (kg) Weight (kg) Tolerance +/- (G) Tolerance +/- (A)
1/4 500 0.05 1.50 1.50
5/16 750 0.08 1.50 1.50
3/8 1000 0.13 3.30 1.50
7/16 1500 0.20 3.30 1.50
1/2 2000 0.27 3.30 1.50
5/8 3250 0.57 3.30 1.50
3/4 4750 1.20 6.35 1.50
7/8 6500 1.43 6.35 1.50
1 8500 2.15 6.35 1.50
1-1/8 9500 3.06 6.35 1.50
1-1/4 12,000 4.11 6.35 3.30
1-3/8 13,500 5.28 6.35 3.30
1-1/2 17,000 7.23 6.35 3.30
1-3/4 25,000 12.1 6.35 3.30
2 35,000 19.2 6.35 3.30
2-1/2 55,000 32.5 6.35 3.30

 

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 94.

Technical specification Technical specification

Nominal Size (inch) Working Load Limit (kg) Weight (kg) Tolerance +/- (G) Tolerance +/- (A)
1/4 500 0.05 1.50 1.50
5/16 750 0.08 1.50 1.50
3/8 1000 0.13 3.30 1.50
7/16 1500 0.20 3.30 1.50
1/2 2000 0.27 3.30 1.50
5/8 3250 0.57 3.30 1.50
3/4 4750 1.20 6.35 1.50
7/8 6500 1.43 6.35 1.50
1 8500 2.15 6.35 1.50
1-1/8 9500 3.06 6.35 1.50
1-1/4 12,000 4.11 6.35 3.30
1-3/8 13,500 5.28 6.35 3.30
1-1/2 17,000 7.23 6.35 3.30
1-3/4 25,000 12.1 6.35 3.30
2 35,000 19.2 6.35 3.30
2-1/2 55,000 32.5 6.35 3.30

Nominal Size (inch) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) K (mm) L (mm) M (mm)
1/4 11.9 7.85 6.35 6.35 24.6 15.5 22.4 40.4 4.85 35.1
5/16 13.5 9.65 7.85 7.85 29.5 19.1 26.2 48.5 5.60 42.2
3/8 16.8 11.2 9.65 9.65 35.8 23.1 31.8 58.5 6.35 51.5
7/16 19.1 12.7 11.2 11.2 41.4 26.9 36.6 67.5 7.85 60.5
1/2 20.6 16 12.7 12.7 46 30.2 41.4 77 9.65 68.5
5/8 26.9 19.1 15.7 16 58.5 38.1 51 95.5 11.2 85
3/4 31.8 22.4 20.6 19.1 70 46 60.5 115 12.7 101
7/8 36.6 25.4 24.6 22.4 81 53 71.5 135 12.7 114
1 42.90 28.7 25.4 25.4 93.5 60.5 81 151 14.2 129
1-1/8 46 31.8 31.8 28.7 103 68.5 91 172 16 142
1-1/4 51.5 35.1 35.1 31.8 115 76 100 191 17.5 156
1-3/8 57 38.1 38.1 35.1 127 84 111 210 19.1 174
1-1/2 60.5 41.4 41.1 38.1 137 92 122 230 20.6 187
1-3/4 73 51 54 44.5 162 106 146 279 25.4 231
2 82.5 57 60 51 184 122 172 312 31 263
2-1/2 105 70 66.5 66.5 238 145 203 377 35.1 330
 


* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 94.